Your cart: 0 Item | Total:

Misty® Si-Dry Silicone Lubricants

Misty Si-Dry Silicone Lubricants, Aerosol Can

50 state compliant

Colorless

Fan spray pattern reduces overspray and waste

Food and textile grade dry silicone spray

Item Code: 019-A329-16

Pack/UOM: CA (1-CA/CA)

Misty® Chain & Cable Lubricants

|MISTY CHAIN & CABLE LUBE

Fortified with moly and PTFE

Ideal for chains, cables and moving assemblies

Lubricates and reduces friction

No chlorinated solvents or ozone depleters

Item Code: 019-A352-16

Pack/UOM: CA (12-CA/CA)

Misty® Free-Exe™ Penetrating Lubricants

|MISTY FREE-EZE

Advanced formula penetrating lubricant

Freezing action breaks open rust barrier

Nonconductive to 33,000 volts

Ultra low VOC content and no chlorinated solvents or ozone depleters

Item Code: 019-A394-16

Pack/UOM: CA (12-CA/CA)

Misty® CF5D+ Diesel Fuel Stabilizers

CF5D+ Diesel Fuel Stabilizers, 1 qt, Bottle

Antioxidant

Can lower diesel fuel pour point to -50F

Cetane improver

Concentrated diesel fuel stabilizer formula

Item Code: 019-G421-12

Pack/UOM: CA (12-CA/CA)

Misty® Red Grease Superfilm®

MistyRed Grease Superfilm, 14 oz Cartridge

Adhesive & cohesive properties

All-purpose non-melt grease formulated with extreme pressure & anti-wear additives

Good resistance to environmental conditions

Protects indoors/outdoors

Item Code: 019-G726-14

Pack/UOM: CA (48-CA/CA)

Zep Professional® Z-Works PTFE Lubricants

|ZEP PROFESSIONAL PTFE LUBRICANT MULTI-PURPOSE OI

Leaves behind a friction reducing film

Premium, long-lasting lubricant

PTFE formulation penetrates rapidly to loosen parts frozen due to wear, corrosion, and grime buildup

Item Code: 019-R07001

Pack/UOM: CA (12-CA/CA)

Zep Professional® Z-Works High Pressure Lubricants

|ZEP PROF Z-WORKS HIGH PRESSURE LUBRICANT

Designed for high-load and extreme temperature applications, product adheres to surfaces to prevent lubricant squeeze out/spin off

Sets up as a gel

Sprays on surfaces as a liquid to penetrate into tight areas

Item Code: 019-R07101

Pack/UOM: CA (12-CA/CA)

Zep Professional® Z-Works Rapid Penetrants

|RAPID PENETREANT WITH CORROSION DEFENSE

Applies to surface as yellow foam to ensure even application and adequate contact time

Multi-purpose, fast-acting aerosol penetrant and lubricant that effectively displaces water

Silicone formulation prevents corrosion

Item Code: 019-R07201

Pack/UOM: CA (12-CA/CA)

Zep Professional® Z-Works PTFE Lubricants

|ZEP PROF Z- WORKS PTFE LUBRICANT

Leaves behind a friction reducing film

Premium, long-lasting lubricant

PTFE formulation penetrates rapidly to loosen parts frozen due to wear, corrosion, and grime buildup

Item Code: 019-R07424

Pack/UOM: CA (4-CA/CA)

Zep Professional® Z- Works Dry Film Lubricants

Z- Works Dry Film Lubricants, 13 oz Aerosol Can

Colorless, odorless, non-toxic, and non-staining

Heavy-duty, long-lasting, dry-film lubricant containing friction-reducing components

Helps inhibit corrosion

Will not rinse off

Item Code: 019-R21701

Pack/UOM: CA (12-CA/CA)

Zep Professional® Z-Works Chlorinated Lubricants

|ZEP PROF Z-WORKS CHLORINATED LUBRICANT

Removes accumulations of grease and grime from surfaces to allow contact with the lubricating, protective film

Item Code: 019-R22001

Pack/UOM: CA (12-CA/CA)

Zep Professional® Z-Works Moly Lubricants

Z-Works Moly Lubricants, 18 oz Aerosol Can

Dry-film molybdenum lubricant that withstands high temperatures and pressures

Protects metal surfaces from rusting and corrosion by displacing moisture

Item Code: 019-R22201

Pack/UOM: CA (12-CA/CA)

Zep Professional® Metal Protectants

Metal Protectant, 13 oz Aerosol Can

Dries to form a transparent, wax-type protective film of approximately 1 mm thick

Use indoors or outdoors on both ferrous and non-ferrous metal surfaces

Item Code: 019-R22701

Pack/UOM: CA (12-CA/CA)

Zep Professional® Protective Coatings

Protective Coating, 5 Gallon Pail

Rust-resistant coating that dries to form a transparent, wax-type protective film of approximately 1 mm thick

Use indoors or outdoors on both ferrous and non-ferrous metal surfaces

Item Code: 019-R23335

Pack/UOM: PA (1-PA/PA)

Zep Professional® Rust Converters

Rust Converter, 1 Gallon Bottle

Converts existing rust and corrosion into a moisture-free, black protective coating

Treated surface is then ready for painting or other treatment without additional priming

Water-based & non-flammable

Item Code: 019-R23424

Pack/UOM: CA (4-CA/CA)

DeWalt® 20V MAX* Lithium-Ion Grease Guns

20V MAX* Lithium-Ion Grease Guns, 14.5 oz, 10,000 psi, Hose, Grease, Cordless Grease Gun

Bright LED list assists in locating hard to see grease fittings in low-light situations

Variable speed trigger offers precise control of the grease flow

Item Code: 115-DCGG571M1

Pack/UOM: EA (1-EA/EA)

Minimum Multiple Quantity: 12

Aervoe Chrome Galvanize

Chrome Galvanize, 16 oz Aerosol Can

Does not contain any lead, chromates, methylene chloride or fluorocarbon propellants

Offers on-the-job application when hot-dip repair is necessary

Restores the very-bright galvanized surfaces commonly found on exposed HVAC ducting where ducting is meant to be an architectural feature

Stops rust and corrosion on any iron or steel surface

Item Code: 205-143

Pack/UOM: CN (12-CN/CA)

Minimum Multiple Quantity: 12

Aervoe MRO Cold Galvanize

MRO Cold Galvanize, 16 oz Aerosol Can

97% pure metallic zinc dust with 93% zinc in dry film

Acts as metallic primer and can be final protective coating at 1 - 2 mil thickness

An economical coating for preventive maintenance on galvanized parts and with multiple coats for longer term protection

If moisture is present, zinc will corrode but it will continue to protect the metal surface

Item Code: 205-147

Pack/UOM: CN (12-CN/CA)

Minimum Multiple Quantity: 12

Aervoe MRO Brite Galvanize

MRO Brite Galvanize, 16 oz Aerosol Can

65% zinc in dry film

97% pure zinc metallic flake

Brite Galvanize Coating is an effective way to repair hot-dip galvanizing that has been damaged by abrasion, scratching, cutting or welding

Does not contain lead, chromates, methylene chloride or fluorocarbons

Item Code: 205-148

Pack/UOM: CN (12-CN/CA)

Minimum Multiple Quantity: 12

Aervoe Food Grade Lube Oils

Food Grade Lube Oils, 16 oz, Aerosol Can

Excellent replacement where silicone can't be used such as carton sealing or capping operations are ongoing

Leaves a clear, non-staining film that resists moisture without leaving a residue

Non-silicone lube oil as a clear mineral oil that penetrates quickly and loosen dirt, corrosive deposits and scale

Separates from water even under acid or alkali conditions

Item Code: 205-932

Pack/UOM: CAN (12-CAN/CS)

2016 © Lone Star Safety & Supply. All Rights Reserved. Powered by Evolution Software