MSA

MSA Products
Accessories-Harnesses
Thermatek™ Kit
The Thermatek Kit includes the components needed for fall protection in welding or other high-heat applications.
List Price: $421.92
Your Price: $378.80 /Each
Air Purifying Cartridges / Filters
Advantage® Respirator Cartridges
Use Advantage Respirator Cartridges in Advantage 200, Advantage 1000 and Advantage 3000 respirators. A wide variety of cartridges are available. Cartridges come two to a pack.
Your Price: $9.58 /2/Pack
Comfo® Respirator Cartridges and Filters
Use Comfo Respirator Cartridges and Filters with the Comfo Classic respirator.
Your Price: $51.06 /10/Box
Buy 10 or more SAVE $2.55 Per Unit
Flexi-Filter® Filters for Advantage Respirators
These low-profile, flexible filters fit well under a welding hood and with other personal protective equipment.
List Price: $9.50
Your Price: $5.95 /2/Pack
GME Super Cartridge
The GME Super Cartridge provides protection against ten specific gases and vapors simultaneously. Using a prefilter and a cover adds protection against fumes, mists, dusts, pesticides and paints.
Your Price: $10.65 /2/Pack
Ultra Elite® Twin-Cartridge Respirator
A twin-cartridge adapter converts the full-face Ultra Elite from a supplied-air respirator to a twin-cartridge respirator.
Your Price: $34.51 /EA
Air Sampling Pumps
Accessories and Replacement Parts for the Escort ELF® and Escort® LC Sampling Pumps
Keep your Escort ELF and Escort LC Sampling Pumps operating at their optimum levels with these accessories and replacement parts.
List Price: $9.50
Your Price: $4.18 /Each
Kwik-Draw® Detector Tube Pumps
The Kwik-Draw Deluxe Pump uses an assortment of MSA detector tubes to accurately spot-test atmospheres for more than 120 hazardous gases and vapors.
Your Price: $399.00 /EA
Air Sampling Tubes
Air Sampling Detector Tubes
MSA Detector Tubes are made of glass with break-off tips. They are filled with treated chemical granules for sampling a variety of substances.
Your Price: $167.63 /10/Box
Beam Anchors
FP Stryder™ Anchorage Connector
The FP Stryder features low-friction Teflon® wear pads which eliminate metal-to-metal contact and ensure that the beam anchor glides smoothly over the beam flange.
List Price: $205.21
Your Price: $182.49 /Each
Bump Testers
MSA Squirt® Gas Bump Test Reactive Gas Cylinders
Squirt Gas Bump Test Cylinders are for use with the Squirt Bump Test Kit (sold separately), and can be used to check the sensor response of MSA instruments in as little as 15 seconds.
Your Price: $79.24 /Each
MSA Squirt® Gas Bump Tester
Check the sensor response of MSA instruments conveniently and inexpensively with the Squirt Gas Bump Tester. (The bump test is intended to supplement regular calibration at a service center or maintenance department.)
Your Price: $88.25 /EA
Calibration Gas Cylinder Regulators
Gas Miser™ Demand Regulator Model RP
The Gas Miser Regulator is the most advanced, yet simple-to-use calibration gas delivery system available.
Your Price: $462.19 /Each
Model RP Combination Regulator
The Model RP Combination Regulator is designed for use with all Model RP and Econo-Cal calibration cylinders.
Your Price: $300.13 /EA
Calibration Gases
Econo-Cal® RP Reactive Calibration Gas Cylinder
The Econo-Cal RP Calibration Cylinder can be used calibrate all MSA portable instruments.
List Price: $226.00
Your Price: $210.00 /Each
Model RP Nonreactive Calibration Gas Cylinder
Model RP Nonreactive Cylinders are used to calibrate all MSA portable instruments using the Model RP Calibration Regulators.
Your Price: $219.14 /EA
Model RP Reactive Gas Calibration Cylinder
Model RP Reactive Cylinders are used to calibrate all MSA portable instruments using the Model RP Calibration Regulators.
Your Price: $438.71 /Each
Cap-Mounted Earmuffs
Helmet-Mounted HPE Muff
The HPE Muff from MSA is designed specifically for very high noise levels and is ideal for airfields, power plants and other areas with intense noise. The HPE Muff provides the highest-rated protection available for low-frequency environments.
Your Price: $31.70 /PR
CBRN Respirators
Millennium® CBRN Gas Mask and Millennium® Riot Control Gas Mask
The Millennium CBRN Gas Mask was the first to receive NIOSH certification for protection against chemical, biological, radiological and nuclear agents.
Your Price: $448.69 /Each
Cross-Arm Straps
Anchorage Connector Strap
Used to secure worker to beam.
List Price: $32.17
Your Price: $28.88 /Each
Davit Arm Systems
Column Davit and Base
The Column Davit and Base are used for more permanent conditions where a tripod will not work. Available with a zinc-plated alloy-steel Davit arm and zinc-plated carbon steel or stainless steel base.
Your Price: $1,393.41 /EA
Descent Devices
Suretyman™ Rescue Utility System
The Suretyman Rescue Utility System provides all of the components needed for confined space entry and rescue.
Your Price: $1,445.43 /EA
Entry Kits
Confined Space Entry Kit Tripod #3
The Tripod #3 Kit includes the Lynx 8’ tripod, the Lynx Rescuer (16m) with tripod mounting bracket, split mount pulley, side-mount Lynx Hoist with 50’ galvanized line, hoist pulley bracket assembly, carrying bags for the equipment, and a Confined Space Training Video.
Your Price: $6,160.69 /Each
Fit Test Kits
Bitrex Qualitative Fit-Test Kit
To perform OSHA-mandated fit testing on all NIOSH-approved air-purifying respirators, use the efficient Bitrex Qualitative Fit-Test Kit.
Your Price: $340.07 /Each
Full Body Harnesses
FP Pro™ Harness
Reliable fall protection in a style that provides all-day comfort.
Your Price: $60.11 /Each
FP Pro™ Harness - Vest-Style
The FP Pro Vest-Style harness provides reliable fall protection that can be worn all day.
Your Price: $83.90 /Each
FP Pro™ Harness and Diamond™ Lanyard Kit
Get an FP Pro Harness and an Diamond shock-absorbing lanyard in one easy-to-order kit.
List Price: $112.20
Your Price: $96.42 /Each
FP Pro™ Harness with Integral Belt and Back Pad
The FP Pro Harness provides reliable fall protection in a style that allows for all-day comfort.
Your Price: $155.65 /EA
TechnaCurv™ Tower Harness
The TechnaCurv Tower Harness provides both reliable fall protection and comfort for those who need additional support while working on a variety of freestanding structures.
Your Price: $386.99 /EA
Workman® Construction-Style Harness with Tongue Leg Buckles and Shoulder Pads
Lightweight and comfortable, the economical Workman Construction-Style Harness has a maximum capacity of 400 lbs. Construction workers love this harness because it includes polyurethane foam shoulder pads, a removable tongue-buckle tool belt, and an integral back pad for added comfort during work positioning.
List Price: $118.16
Your Price: $114.62 /Each
Buy 12 or more SAVE $2.29 Per Unit
Workman® Harness with Qwik-Fit Leg Buckles
The economical, vest-style Workman Harness is lightweight and comfortable, and offers a maximum capacity of 400 lbs.
List Price: $51.68
Your Price: $50.13 /Each
Buy 12 or more SAVE $1.00 Per Unit
Full Brim Hard Hats
V-Gard® Full Brim Safety Helmet with 4-Point 1-Touch® Suspension
The V-Gard Protective Safety Helmet has a polyethylene shell and suspension system that work together as a system to protect the head against top impacts.
List Price: $12.76
Your Price: $11.56 /Each
V-Gard® Full Brim Safety Helmet with 4-Point Fas-Trac® Ratchet Suspension
The V-Gard Protective Safety Helmet has a polyethylene shell and suspension system that work together as a system to protect the head against top impacts.
Your Price: $16.63 /Each
V-Gard® Full Brim Safety Helmet with 4-Point Staz-On® Suspension
The V-Gard Protective Safety Helmet has a polyethylene shell and suspension system that work together as a system to protect the head against top impacts.
Your Price: $11.17 /Each
Full Facepiece PAPR Assemblies
OptimAir® 6A PAPR
Constant air flow to either a full Ultravue® facepiece provides protection from particulates, toxic gases and vapors, or a combination of these hazards.
Your Price: $92.97 /6/Box
OptimAir® MM2K PAPR with Type HE OptiFilter® XL Cartridge
The OptimAir MM2K Powered Air-Purifying Respirator (PAPR) is designed for work in abatement, nuclear, lead, and other hazardous particulate environments. The PAPR filters particulates and provides a constant flow of respirable air to the Ultravue® or Ultra Elite® Facepiece.
List Price: $659.00
Your Price: $591.64 /Each
Buy 10 or more SAVE $29.58 Per Unit
Full Facepiece Respirators
Advantage® 1000 Full Facepiece Respirator
The low-maintenance, low-cost, durable Advantage 1000 Full Facepiece Respirator weighs about 40% less than conventional full facepiece respirators.
Your Price: $187.14 /Each
Advantage® 3200 Twin-Port Full Facepiece Respirator
The Advantage 3200 Twin-Port Respirator is designed to enhance worker performance by maximizing comfort and efficiency,
Your Price: $119.60 /Each
Ultra-Twin® Full Facepiece Respirator
The inturned lip around the edge of the Ultra-Twin Full-Facepiece Respirator creates a tight seal against the face.
Your Price: $291.08 /EA
Goggle Retainers
Goggle Retainer
MSA Goggle Retainers hold goggles securely on cap or hat.
Your Price: $10.94 /Each
Half Mask Respirators
Advantage® 200 LS Respirator
Advantage 200 LS Respirator features a facepiece made from a new clear blue formulation of thermoplastic rubber. The new facepiece is 25% lighter and noticeably softer than the previous model.
Your Price: $10.94 /Each
Comfo® Classic Half Mask Respirator
The pliable, soft, textured sealing surfaces of the SoftFeel® facepieces on Comfo Classic Half Mask Respirators come from extensive research.
Your Price: $30.74 /Each
Hard Hat Chin Straps
MSA V-Gard Chin Straps
Help keep hats and caps stable on the worker's head. Available in two styles, they contain no metal parts, so they can be worn on dielectric head wear without affecting dielectric qualifications.
Your Price: $49.36 /PK
Hard Hat Faceshield Brackets
Defender®+ Faceshield Frame
The Defender+ Faceshield Frame fits V-Gard standard-size slotted caps to provide front-drip-edge splash protection. Attach an MSA visor for use in chemical plants and other industrial applications that demand face protection against small flying objects, abrasive particles and chemical splashes.
List Price: $12.83
Your Price: $12.50 /EA
Buy 12 or more SAVE $0.31 Per Unit
Defender®+ Foldback Faceshield Frames
Foldback Faceshield Frames come in plastic (dielectric) and metal.
Your Price: $10.25 /Each
Hard Hat Style
MSA Bump Cap
The MSA Bump Cap provides protection against minor bumps and abrasion, and is ideal for applications that do not require ANSI-compliant head protection.
Your Price: $4.07 /Each
Hard Hat Sun Shields
Sun Shields for V-Gard® Safety Helmets
Extend the brim of the V-Gard Safety Hat for added protection from the sun.
Your Price: $13.96 /Each
High Heat Hard Hats
Skullgard® High Heat Protective Full Brim Hat with 4-Point Fas-Trac® Suspension - Type I, Class G (Electrical Low Voltage) - Heat Rated to 350°F
The Skullgard is commonly known as the “iron workers’ helmet”. A heavy-duty, six-layer construction provides excellent protection from both top impact and the high temperatures found in steel mills and similar work environments.
Your Price: $104.42 /Each
High-Heat Visors
Adapter Kits for Welding Shields and Sparkgards
Permit the easy attachment of Welding Shields and Sparkgards with visors to MSA’s slotted caps.
Your Price: $20.40 /EA
Hood PAPR Assemblies
OptimAir® 6HC PAPR
Health care workers get the respiratory protection they need from chemical, biological and radiological agents with the OptimAir 6HC.
Your Price: $368.43 /EA
Horizontal Lifelines
Sure-Line™ Horizontal Lifeline
This lightweight steel cable anchors between two approved points and provides fall protection for workers who need to move in horizontal direction.
Your Price: $447.08 /Each
Medical Information Carrier System
The Medical Information Carrier System
The Medical Information Carrier System provides crucial, even lifesaving, information in the event of a medical crisis. It consists of a polyolefin film data form, a heavy-duty neon orange carrier, high-tech tape, and a reflective helmet decal.
Your Price: $25.65 /10/Pack
NFL Hard Hats
Sports Team V-Gard® Helmets with 4-Point 1-Touch® Suspension
Now football fans across the country can have on-the-job protection against impact from falling objects, while showing their loyalty to their favorite team.
Your Price: $27.08 /Each
Over-the-Head Earmuffs
Headband HPE Muff
The HPE Muff from MSA is designed specifically for very high noise levels and is ideal for airfields, power plants and other areas with intense noise. The HPE Muff provides the highest-rated protection available for low-frequency environments.
Your Price: $30.30 /PR
Patriotic Hard Hats
V-Gard® Freedom Series Full Brim Safety Hat with 4-Point Fas-Trac® Ratchet Suspension
The V-Gard Protective Safety Helmets have a polyethylene shell and suspension system that work together as a system to protect the head against top impacts. Choose between the slotted safety cap or the full-brim safety hat.
Your Price: $38.41 /EA
V-Gard® Freedom Series Safety Cap with 4-Point Fas-Trac® Ratchet Suspension
The V-Gard Protective Safety Helmets have a polyethylene shell and suspension system that work together as a system to protect the head against top impacts. Choose between the slotted safety cap or the full-brim safety hat.
List Price: $29.16
Your Price: $26.44 /Each
Photoionization/VOC Monitors
Sirius™ Multigas Detector with PID Sensor
The highly reliable, easy-to-use Sirius Multigas Detector integrates a high-performance PID (Photoionization Detector) with a four-gas detector, enabling it to measure for combustible, toxic and oxygen-deficient atmospheres while simultaneously monitoring for VOCs (volatile organic compounds).
List Price: $4,423.00
Your Price: $4,338.50 /Each
Pinlock Suspension Faceshield Headgear
Defender®+ Headgear Faceshield Frames
Defender+ Headgear is designed for work environments in which hard hats aren’t required, but faceshields are a necessity.
List Price: $9.50
Your Price: $8.13 /Each
Pinlock Suspensions
Skullgard® and Comfo-Cap® Hard Hat Replacement Fas-Trac® Suspension and Swing-Ratchet Supension
Accommodates all Skullgard High Heat Safety Helmets and Comfo-Cap Mining Hats.
Your Price: $14.58 /Each
Thermalgard® and Topgard® Hard Hat Replacement Staz-On Suspension
Accommodates all Thermalgard and Topgard Caps and Hats.
Your Price: $6.85 /Each
Polycarbonate Faceshields/Visors
MSA Polycarbonate Visors for Faceshield Frames
Choose from a wide variety of visors that fit easily on MSA faceshield frames.
List Price: $9.50
Your Price: $6.70 /Each
Buy 12 or more SAVE $0.33 Per Unit
Portable Multigas Detectors
FiveStar® Personal Alarm
The FiveStar® Alarm is the first multigas personal alarm that can be customized for literally thousands of tasks. Designed with MSA’s innovative “smart sensor” technology, the FiveStar Alarm allows the user to select the best combination of sensors to match the task at hand. There are seven sensors to choose from, and as many as five can be used at one time. The sensors can easily be changed and calibrated. The FiveStar Alarm:
Your Price: $51.82 /10/Pack
The Orion® Multigas Detector
The Orion Multigas Detector is an economical, portable gas monitor that detects and measures the presence of O2, H2S, CO and combustibles.
Your Price: $200.00 /Each
Portable Single Gas Detectors
Altair Single-Gas Monitor
Disposable, maintenance-free gas monitor offers high performance at detecting and monitoring O2, CO or H2S, yet is extremely cost-effective. Use it for over two years, then just throw it away.
List Price: $218.00
Your Price: $199.00 /Each
Ratchet Suspensions
Thermalgard® and Topgard® Hard Hat Replacement Fas-Trac Suspension
Accommodates all Thermalgard and Topgard Caps and Hats.
Your Price: $12.10 /EA
V-Gard® Hard Hat Replacement 4-Point Fas-Trac® Suspension
Accommodates all V-Gard Hard Hats.
List Price: $13.30
Your Price: $10.67 /1/EA
Buy 10 or more SAVE $0.53 Per Unit
Rebar Positioning Lanyards
Rebar Restraint Lanyard Assemblies
Rebar Restraint Lanyard Assemblies meet the fall protection needs of those working on wall forms and concrete construction. They fasten securely to anchorage points existing on rebar and other framework.
List Price: $65.19
Your Price: $60.87 /Each
Respirator Facepiece Communication Kits
ESP® II Communications System
The ESP II electronically projects speech, making important communication in contaminated environments easy.
Your Price: $403.14 /Each
Roof Anchors
ManSafe® Freestanding Constant Force Post
Provides stability, versatility, and mobility all in one easy-to-install stanchion and does not attach to the working surface, limiting the possibility of damage to surfaces in the event of a fall. Due to its modular design, the installer will never have to lift more than 55 pounds (25 kg) at any given time. Used on nominally flat roofs up to a maximum pitch of five degrees. Tested and approved for use on concrete, single ply membrane, asphalt-sanded, asphalt-stone chipped and steel roof profiles. Interlocking segments are arranged in a circular form, ensuring that the post is omni-directional.
Your Price: $4,485.27 /EA
Roof Kits
FP Pro™ Roofers’ Kit
All of the fall protection equipment needed for roofing applications is available in the FP Pro Roofers’ Kit.
Your Price: $334.75 /Each
Self-Retracting Lanyards
Aptura™ LT Self-Retracting Lanyard
The Aptura LT Self-Retracting Lanyard (SRL) has an extensive range of features which make it one of the most comprehensive SRL’s on the market.
List Price: $350.80
Your Price: $311.94 /Each
Shock-Absorbing Lanyards
ArcSafe™ Shock-Absorbing Lanyard
Provides arc flash protection up to 40 cal/cm2, and is designed for utility and maintenance workers. Durable 9500-lb nylon webbing has web loop attachment points which reduce weight and reduce metallic hardware. 6’ integral Shock-Absorbing Lanyard limits fall arrest forces to 900 lbs or less. The nylon web Lanyard has a sewn loop on the shock-absorber end and a snap hook on the lanyard leg. Meets applicable OSHA and ANSI standards. Meets ASTM F887-05 standards.
List Price: $90.63
Your Price: $81.37 /Each
Diamond™ Lanyard with Integral D-Ring Extension
The integral D-ring extension leg provides the user with an additional dorsal attachment point for connecting to a self retracting lanyard when twin legs are not in use. This allows the user to maintain 100% tie-off while transitioning from a shock-absorbing lanyard to a self-retracting lanyard and vice-versa.
Your Price: $182.05 /EA
FP Diamond™ Expanyard
The elastic design of the FP Diamond Expanyard allows it to contract, which greatly reduces trip and snag hazards.
Your Price: $167.16 /EA
Buy 6 or more SAVE $8.36 Per Unit
FP5K™ Tie-Back Shock-Absorbing Lanyard
The rugged FP5K carabiner gives the FP5K Tie-Back Shock-Absorbing Lanyard extreme strength.
Your Price: $399.00 /Each
Workman® Twin-Leg Shock-Absorbing Adjustable Lanyard with Tie-Back and Snaphook
Workman shock-absorbing lanyards are lightweight with a low-profile body. The Workman Twin-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing. The shock absorber includes a clear, durable protective cover over the labels to increase service life and allow for easy inspection.
List Price: $72.23
Your Price: $70.06 /Each
Buy 12 or more SAVE $1.40 Per Unit
Workman™ Single-Leg Shock-Absorbing Lanyard
The Workman Single-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing.
List Price: $41.55
Your Price: $40.30 /Each
Buy 12 or more SAVE $0.81 Per Unit
SRL/Tripod Rescue Systems
Lynx™ Rescuer, Field Resettable Model with Lockout
The Lynx Rescuer has emergency lifting and lowering capabilities for nonentry rescue of a worker trapped in a confined space.
Your Price: $1,748.36 /Each
Standard Brim Hard Hats
Topgard® Protective Cap - Type I, Class E (Electrical- High Voltage)
Lightweight and durable, the Topgard Protective Cap is designed for utilities and other industries where both head protection and good dielectric properties (nonconduction of electrical current) are required.
List Price: $34.83
Your Price: $33.09 /Each
Buy 20 or more SAVE $0.99 Per Unit
Topgard® Protective Hat - Type I, Class E (Electrical- High Voltage)
Lightweight and durable, Topgard Protective Caps and Hats are designed for utilities and other industries where both head protection and good dielectric properties (nonconduction of electrical current) are required.
Your Price: $23.81 /Each
V-Gard® Protective Safety Cap with 4-Point 1-Touch® Suspension
The polyethylene shell and suspension system of the V-Gard Protective Safety Cap consists of a polyethylene shell and suspension system working together as a protection system.
List Price: $8.71
Your Price: $7.89 /Each
V-Gard® Protective Safety Cap with 4-Point Fas-Trac® Ratchet Suspension
The polyethylene shell and suspension system of the V-Gard Protective Safety Cap consists of a polyethylene shell and suspension system working together as a protection system.
Your Price: $12.47 /Each
V-Gard® Protective Safety Cap with Uni-Pro™ Suspension
The polyethylene shell and suspension system of the V-Gard Protective Safety Cap consists of a polyethylene shell and suspension system working together as a protection system.
List Price: $5.83
Your Price: $5.29 /Each
V-Gard® Protective Safety Cap with Uni-Pro™ Suspension
The polyethylene shell and suspension system of the V-Gard Protective Safety Cap consists of a polyethylene shell and suspension system working together as a protection system.
List Price: $5.83
Your Price: $5.45 /Each
V-Gard® Slotted Protective Safety Cap with 4-Point Staz-On® Suspension, Standard Size
The V-Gard Protective Safety Helmet has a polyethylene shell and suspension system that work together as a system to protect the head against top impacts. Standard size fits hat sizes between 6-1/2 and 8.
List Price: $9.50
Your Price: $8.53 /Each
Buy 20 or more SAVE $0.35 Per Unit
Standard Frame Safety Glasses
Arctic™ Protective Eyewear
Arctic Protective Eyewear combines contemporary design with outstanding eye protection.
List Price: $9.50
Your Price: $3.78 /Each
Sweatbands
Custom Terri-Band® Sweatband
Use the Custom Terri-Band Sweatband with safety helmets to keep head dry and comfortable.
Your Price: $55.10 /10/Pack
Trailing Rope Grabs
MSA Rope Grab Fall Arrester
Rope Grab features a cam and hinge design that allows for a quick, easy installation on the rope and ultra-smooth travel action.
List Price: $120.42
Your Price: $0.00 /Each
Tripods
Lynx™ Tripod Unit
This portable 8 or 10’ tripod is an anchorage connector used for confined space applications.
List Price: $797.17
Your Price: $708.88 /Each
Buy 3 or more SAVE $35.44 Per Unit
Vented Hard Hats
V-Gard® 500 Vented Hard Hat with 4-Point Fas-Trac® Ratchet Suspension
The V-Gard 500 Vented Cap is a cool new hard hat, with six large cooling vents along the crown to dramatically reduce heat buildup inside the durable, lightweight ABS helmet.
List Price: $14.86
Your Price: $14.41 /Each
Buy 20 or more SAVE $0.58 Per Unit
Vertical Lifelines
Rope Termination Plate
Terminate rope without having to tie intricate, hard-to-remove knots.
Your Price: $49.55 /EA
Vest-Type Harnesses
ArcSafe™ Cross-Over Harness with Integral Shock Absorber Pack
Provides arc flash protection up to 40 cal/cm2, and is designed for utility and maintenance workers. Durable 9500-lb nylon webbing has web loop attachment points which reduce weight and reduce metallic hardware. A Y-shaped back web loop locator pad enhances comfort and allows for easy adjustment of the back web loop. An optional 6’ integral Shock-Absorbing Lanyard limits fall arrest forces to 900 lbs or less. The nylon web Lanyard has a sewn loop on the shock-absorber end and a snap hook on the lanyard leg. Meets applicable OSHA and ANSI standards. Meets ASTM F887-05 standards.
List Price: $144.17
Your Price: $129.43 /Each
ArcSafe™ Cross-Over Harness with Qwik-Fit Buckles
Provides arc flash protection up to 40 cal/cm2, and is designed for utility and maintenance workers. Durable 9500-lb nylon webbing has web loop attachment points which reduce weight and reduce metallic hardware. A Y-shaped back web loop locator pad enhances comfort and allows for easy adjustment of the back web loop. An optional 6’ integral Shock-Absorbing Lanyard limits fall arrest forces to 900 lbs or less. The nylon web Lanyard has a sewn loop on the shock-absorber end and a snap hook on the lanyard leg. Meets applicable OSHA and ANSI standards. Meets ASTM F887-05 standards.
List Price: $112.85
Your Price: $101.32 /Each
Winch Systems
Lynx™ Hoist System
Rugged and economical, with all-steel construction and an internal shock absorber, the versatile Lynx Hoist System takes a maximum personnel load of 310 lb. (141kg), (a 10:1 design factor), and a materials load of up to 620 lb. (281kg), (a 5:1 design factor).
Your Price: $1,766.77 /Each