An array of lockout/tagout equipment can be easily stored and transported with the Group Lockout Kit.

The tools needed to fill basic lockout needs housed in a portable polyethylene carrying case.

The best way to assure that a worker has access to his/her lockout equipment is to have it stored around their waist.

An array of lockout components are conveniently stored in a durable duffel bag.

A lightweight modular carrying case keeps lockout/tagout equipment well organized and easily accessible.

The Safety Lockout Center helps create safety awareness by its very presence, providing a dynamic, highly visible focal point for distributing locks, tags, lockout devices and information.

Made of 14 gauge steel coated with red plastic, the Padlock Station holds up to six padlocks (depending on lock width).

The Four Padlock Wall Station features a one-piece molded design made of virtually indestructible TUF plastic for years of reliable service. The Wall Station is so durable, you can literally stand on it without damaging it at all.

The Deluxe Lockout Station stores and organizes a massive amount of lockout equipment and accessories.

The Ten Padlock Wall Station features a one-piece molded design made of virtually indestructible TUF plastic for years of reliable service. The Wall Station is so durable, you can literally stand on it without damaging it at all.

The Twenty Padlock Wall Station features a one-piece molded design made of virtually indestructible TUF plastic for years of reliable service. The Wall Station is so durable, you can literally stand on it without damaging it at all.

Accident prevention signs and tags are intended to indicate potential type and degree of hazard that may lead to accidental injury or property damage.

Cardstock lockout tags are a cost-effective option for single use applications. Cardstock tags do not meet OSHA's 50 lb pull test for tagout devices, but can be used in conjunction with locks to enhance visual awareness.

“Do Not Operate” Tags clearly identify the user of a lockout padlock, enhancing safety.

There’s no need to stock several sizes of lockouts when you’ve got the Seal Tight Ball Valve Lockout. The innovative design has a universal fit, effectively locking out valves from 3/8” to 4”.

A sliding bracket with multiple hole alignment allows B-Safe Ball Valve Lockouts to lock out even in the open position. Made of durable polypropylene, this lockout will not crack and is abrasion resistant.

Dangerous equipment must be locked out during servicing to prevent accidental startup, and the keys to those lockout devices must be secured safely in a lock box. For workers’ safety, the Latch Tight Group Lock Box is impossible to open until all servicing is complete and the last worker’s padlock has been removed.

It can be hard to keep track of the lockouts of several people working on the same equipment. The Group Lock Box doesn’t allow lockouts to be removed until each person in a group is accounted for.

The Lockout Leash keeps padlocks conveniently near a frequently used lockout point.

The safety hasp and cable are a quick and easy way to lockout multiple circuit breaker panels or adjacent gate valves.

The Plastic Nonconductive Hasp is fully dielectric for added protection.

The spring-loaded locking arm feature employed by the Snap-On Labeled Hasp conveniently and easily attaches to equipment and allows the hasp to be used for a variety of lockout applications.

The Prinzing Lockout Hasp makes it possible for up to 6 workers to lock out the same device.

Dual opening scissor-type hasp, accommodates six padlocks up to 3/8" shackle diameter.

Durable reinforced steel body Padlocks stand up to extreme physical abuse.

Safety Lockout Hasps allow up to six workers to lock out a single energy source. They accept standard padlocks up to 3/8'' shackle diameter.

The Safety Lockout Hasp accommodates the personal locks of up to six workers at one time.

Keep machinery locked out with a durable metal hasp.

The M-Safe Nylon Hasp is chemical and abrasion resistant as well as fully dielectric. The hasp maintains maximum flexibility in hot and cold environments.

It’s a cinch to lock out large and odd-shaped electrical plugs and connectors with the Lockout Cinch Sack. Simply place the large, reinforced nylon Cinch Sack around plug or connector, cinch closed, then apply up to six padlocks or hasps.

This "No Hole" Circuit Breaker Lockout will lock out most single pole circuit breakers. Also locks out most Federal Pacific breakers.

Locks out most major-brand switches. Features a design that easily snaps onto the breaker switch.

This 480/600-volt frame lockout fits breakers up to 2-1/2" wide by 7/8" thick.

Prinzing Circuit Breaker Lockouts ensure that breakers are locked out safely.

The flexible steel cable shackle of this padlock is specially designed for use in circuit breaker lockout applications.

Lockout Cleats assure lockout for long sliding switch throws and switches with large angular rotation regularly found on some Westinghouse, ITE, Square D and Federal Pacific circuit breakers.

Prinzing Circuit Breaker Lockouts ensure that breakers are locked out safely.

Secure and simple mounting for secure breaker lockout. Grip tight with simple thumb screw and clamping handle.

Breaker switch lockouts allow breakers to be locked out safely.

This Universal Lockout can be used on most multi-pole breakers with tie bars. No self-locking tie is needed.

Prinzing Circuit Breaker Lockouts ensure that breakers are locked out safely.

Prevent the accidental wall switch activation of an electrical circuit with the Universal Wall Switch Lockout.

The E-Safe Lock-A-Plug completely encloses an electrical plug, locking it out and preventing accidental reconnection.

Made of durable polypropylene, Brady's Plug Lockout is a safe and economical way to lock out electrical plugs. This plug lockout prevents anyone from reconnecting to the power source before it is safe to do so.

The lightweight Rotating Electrical Plug Lockout opens into itself when it’s not in use, which saves space and allows for convenient storage.

The Compact Plug Lockout quickly attaches to the prongs of 110 and 120V plugs.

This lockout device safely secures a valve handle and prevents the accidental opening of a gate valve.

The V-Safe Valve Cover locks and protects valves by completely covering the valve wheel with two flattened half moons made of strong polypropylene plastic.

An easy way to personalize safety lockout padlocks.

Color-coded aluminum padlocks, available with laser engraving, assist in compliance with OSHA regulations.