The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

Rebar Restraint Lanyard Assemblies meet the fall protection needs of those working on wall forms and concrete construction. They fasten securely to anchorage points existing on rebar and other framework.

The rugged Rope Lanyard is constructed of 1/2” three-strand nylon with a five-tuck splice.

The Positioning and Restraint Lanyard is constructed of durable 1” polyester webbing with self-locking snap hooks on both ends.

The Y-Type Retrieval Lanyard is made of 1-3/4" polyester web.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

Provides arc flash protection up to 40 cal/cm2, and is designed for utility and maintenance workers. Durable 9500-lb nylon webbing has web loop attachment points which reduce weight and reduce metallic hardware. 6’ integral Shock-Absorbing Lanyard limits fall arrest forces to 900 lbs or less. The nylon web Lanyard has a sewn loop on the shock-absorber end and a snap hook on the lanyard leg. Meets applicable OSHA and ANSI standards. Meets ASTM F887-05 standards.

EZ Stop® II shock absorbing lanyards are designed for versatility and are available in many variations including this tie-back model that eliminates the need for a separate anchorage connector. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

Workman shock-absorbing lanyards are lightweight with a low-profile body. The Workman Twin-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing. The shock absorber includes a clear, durable protective cover over the labels to increase service life and allow for easy inspection.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The tie-back model EZ Stop II eliminates the need for a separate anchorage connector. All EZ Stop II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The integral D-ring extension leg provides the user with an additional dorsal attachment point for connecting to a self retracting lanyard when twin legs are not in use. This allows the user to maintain 100% tie-off while transitioning from a shock-absorbing lanyard to a self-retracting lanyard and vice-versa.

The elastic design of the FP Diamond Expanyard allows it to contract, which greatly reduces trip and snag hazards.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The EZ Stop III Lanyard combines exceptional strength and ease of use into one safe and effective shock-absorbing lanyard.

The strong, safe BackBiter Lanyard is specifically designed for tying back at any angle.

The Workman Single-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing.

The EZ Stop II Lanyard utilizes a tearing action in the shock-absorbing pack to keep the fall arresting forces under 900 lbs.

The ShockWave Shock-Absorbing Lanyard is made for work situations where 100% tie-off is needed. It is part of the EZ Stop® II Series, which includes many specialty lanyards made for certain work environments.

Meeting the stringent requirements of the ANSI .13 standard, Guardian's "Shock Absorbing Lanyards" limit the average arresting forces to 900 pounds or less.

The ShockWave2™ shock absorbing lanyards are stretchable for complete freedom of movement, this twin-leg model allows you to keep one leg attached to the anchorage while the other leg is always ready to be hooked to the next anchorage. The ShockWave2™ incorporates a unique inner core that immediately begins to extend and absorb energy during a fall, limiting arresting forces to no more than 900 lbs. Reduces trip fall hazards, dragging and snagging for complete freedom of movement. Twin-leg 100% tie-off style helps you remain connected at all times.

The StretchStop Lanyard stretches from 4 to 6', offering excellent worker mobility.

The rugged FP5K carabiner gives the FP5K Tie-Back Shock-Absorbing Lanyard extreme strength.

Model 1240906 is a two-legged shock-absorbing lanyard that provides workers with 100% tie-off capability. Expands up to 6' and contracts down to 4-1/2'.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The Manyard Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

Helps in preventing objects from falling and causing injuries.

Bandit Tool Lanyards reduce the lost time and potential for injuries that may result when tools are dropped from heights.

The "Internal Shock Lanyard" is made with heavy duty outer polyester webbing and a polyester core specifically sewn in to reduce impact forces

Hi-Vis 1" x 12' Adjustable Lanyard (Tail Rope)

The compact Retractable Web Lanyard has a wide range of uses in Fall Protection applications. The lanyard hooks to a D-ring on a fall protection harness, then plays itself out as the worker moves around, and retracts to take up the slack to avoid tripping hazards.

The Aptura LT Self-Retracting Lanyard (SRL) has an extensive range of features which make it one of the most comprehensive SRL’s on the market.

The hook of the Wall Form Hook and Chain Lanyard is tapered to 1/4” at the end to fit most wedge bolt slots or holes on wall forms, providing fall protection to wall form workers.