Squirt Gas Bump Test Cylinders are for use with the Squirt Bump Test Kit (sold separately), and can be used to check the sensor response of MSA instruments in as little as 15 seconds.

Check the sensor response of MSA instruments conveniently and inexpensively with the Squirt Gas Bump Tester. (The bump test is intended to supplement regular calibration at a service center or maintenance department.)

Bump Gas

Model RP Reactive Cylinders are used to calibrate all MSA portable instruments using the Model RP Calibration Regulators.

NON-REACTIVE SINGLE AND TWO GAS MIXES

The Econo-Cal RP Calibration Cylinder can be used calibrate all MSA portable instruments.

Model RP Nonreactive Cylinders are used to calibrate all MSA portable instruments using the Model RP Calibration Regulators.

REACTIVE MULTI GAS MIXES

The Lumidor Enforcer Multigas Calibrator is a portable bump test and calibration docking station that provides a quick and easy way to calibrate Impact and Impact Pro multigas monitors fitted with oxygen, flammable gas, carbon monoxide and hydrogen sulfide sensors.

The Model RP Combination Regulator is designed for use with all Model RP and Econo-Cal calibration cylinders.

GASCO offers a wide selection of Regulators, ranging from our cost effective Control Valve (CV-2) to our highest quality Stainless Steel Regulators (70/SS) for Highly Reactive Gas Mixtures.

The Gas Miser Regulator is the most advanced, yet simple-to-use calibration gas delivery system available.