An oil mist air sampler that determines which N95 respirator to use in your work environment. The BDXII is a low-cost, high-performance personal air sampling pump.

Use the HAZMAT Simultest Kit when initially assessing potentially hazardous situations, structural fires and organic chemical families.

The Clandestine Lab Simultest Kit is designed to detect the presence of the five dangerous gases most often encountered by law enforcement and first responders when they first enter the illegal laboratories used in the production of methamphetamine.

Allegro’s Flow Meter is designed to be separate from the air sampling pump. This allows the user to use the same Flow meter to set the flow for more than one pump.

For short-term measurements more than 160 Dräger-Tubes are available to measure the so-called spot concentrations of specific gases.

The Draeger Hot-Pack Holder and Hot-Packs allow the use of Draeger-Tubes below the temperature stated in their instructions.

MSA Detector Tubes are made of glass with break-off tips. They are filled with treated chemical granules for sampling a variety of substances.

The accuro 2000 is a battery powered gas detector pump that is used in combination with the accuro pump allowing "hands-free" operation of the Dräger-Tube System.

The Kwik-Draw Deluxe Pump uses an assortment of MSA detector tubes to accurately spot-test atmospheres for more than 120 hazardous gases and vapors.

The Sampler is a motorized sampling pump that provides a 300 mL/min. flow rate for remote sampling from up to 50’ away, making it ideal for pre-entry to or continuous work in confined spaces.

Keep your Escort ELF and Escort LC Sampling Pumps operating at their optimum levels with these accessories and replacement parts.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication. A scissors mechanism ensures a uniform pump stroke, delivering 100 cc's of sample air. Includes a built-in stroke counter and an end-of-stroke indicator.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication. A scissors mechanism ensures a uniform pump stroke, delivering 100 cc's of sample air. Includes a built-in stroke counter and an end-of-stroke indicator.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication. A scissors mechanism ensures a uniform pump stroke, delivering 100 cc's of sample air. Includes a built-in stroke counter and an end-of-stroke indicator.