The Formaldehyde Monitor is designed for sampling personnel or work areas in health care, laboratories and in the chemical, pulp/paper, foundry and textile industries.

Single charcoal sorbent wafer allows for easy collection of organic vapors. Send to 3M or the lab of your choice for analysis by gas chromatography.

This Organic Vapor Monitor utilizes primary and back-up sorbent media for sampling demanding enviroments.

The sensor is the heart of any gas detection instrument. Dräger eXtra Stability (XS) sensors provide outstanding performance. The XS sensors offer the longest warranties in the

The highly reliable, easy-to-use Sirius Multigas Detector integrates a high-performance PID (Photoionization Detector) with a four-gas detector, enabling it to measure for combustible, toxic and oxygen-deficient atmospheres while simultaneously monitoring for VOCs (volatile organic compounds).

The VX500 PID uses a field-replaceable, plug-in detector and interchangeable 10.6eV or 11.7eV lamps to detect and measure hazardous volatile organic compounds (VOCs) like toluene, xylene and vinyl chloride at levels as low as 100 parts per billion (ppb).

The GasAlertMicro Multigas Detector continuously displays simultaneous levels of from two to all four of these gases: combustibles, O2, H2S and CO. The SamplerPak includes the detector and standard accessories plus the Sampler (an external motorized pump), sampling hoses and tubes and a carrying case.

The GasAlertQuattro simultaneously monitors and displays oxygen, hydrogen sulfide, carbon monoxide, and combustibles. A large, easy-to-read LCD shows concentrations of the four gases simultaneously.

The MiniMAX4 employs patented SureCell™ sensor technology and Reflex™ cell check technique to detect and measure up to four gases simultaneously, including O2, CO, H2S and combustible gas. Operation is kept simple by offering only those functions required to comply with legislation. All routine, everyday functions can be achieved with the press of a single button, so training requirements are reduced. But don’t be misled. The MiniMAX4 still offers an impressive array of features.

The GasAlertMicro 5 PID Multi-Gas Detector uses a PID (Photo-Ionization Detector) to measure for PID-detectable VOC’s (volatile organic compundes) while simultaneously monitoring and continuously displaying up to four additional atmospheric hazards, including O2, LEL and a range of toxic gases.

The GasAlertMicro Multigas Detector continuously displays simultaneous levels of from two to all four of these gases: combustibles, O2, H2S and CO.

Simultaneously and continuously displays gas concentrations for up to four gases. A 95dB audible alarm, dual LED visual alarm bars and vibrating alarm warn when dangerous gas levels are encountered.

The compact, reliable X-am 3000 is a 3- or 4-gas warning device that monitors combustible gas, O2, CO and H2S in ambient air. Precalibrated electrochemical sensors and the catalytic sensor are automatically recognized. All sensors are precise, reliable and show fast, accurate responses to changing gas concentrations.

The water-resistant GasAlertMicro 5 Multigas 5-Gas Detector will continuously and simultaneously monitor up to five gases and display their concentrations on a large, user-selectable backlighted LCD.

The GasAlertMax XT simultaneously monitors and displays up to four gases including oxygen, hydrogen sulfide, carbon monoxide, and combustibles. An integrated sampling pump utilizes SmartSample pump technology, which improves accuracy, ensures a consistent flow, and samples from up to 66’.

The FiveStar® Alarm is the first multigas personal alarm that can be customized for literally thousands of tasks. Designed with MSA’s innovative “smart sensor” technology, the FiveStar Alarm allows the user to select the best combination of sensors to match the task at hand. There are seven sensors to choose from, and as many as five can be used at one time. The sensors can easily be changed and calibrated. The FiveStar Alarm:

The water-resistant GasAlertMicro 5 Multigas 5-Gas Detector will continuously and simultaneously monitor up to five gases and display their concentrations on a large, user-selectable backlighted LCD.

The Lumidor Impact Pro IR Multigas Monitor monitors and displays measurements for up to four gases simultaneously and has infrared optical sensors which can also detect % LEL or % VOL methane and other hydrocarbons.

The Orion Multigas Detector is an economical, portable gas monitor that detects and measures the presence of O2, H2S, CO and combustibles.

The GasAlertMicro 5 PID Multi-Gas Detector uses a PID (Photo-Ionization Detector) to measure for PID-detectable VOC’s (volatile organic compundes) while simultaneously monitoring and continuously displaying up to four additional atmospheric hazards, including O2, LEL and a range of toxic gases.

The Lumidor MicroMAX PRO Multigas Monitor can simultaneously detect and measure from one to five gases, using either the built-in sampling pump or, to save power, the diffusion mode.

The GasAlertMicro 5 IR Multi-Gas Detector uses a nondispersive infrared (IR) sensor to monitor carbon dioxide levels (0-5% or 0-50,000 ppm) while simultaneously monitoring and continuously displaying up to four additional atmospheric hazards, including O2, LEL and a range of toxic gases.

Handheld MinMAX Gas Detectors help ensure that a working environment is safe and free of harmful gases.

The water-resistant GasAlertMicro 5 Multigas 4-Gas Detector will continuously and simultaneously monitor up to four gases and display their concentrations on a large, user-selectable backlighted LCD.

These Confined Space Kits contain all the tools necessary to test the atmosphere prior to entering a confined space, ensuring safe entry.

The GasAlertMicro 5 IR Multi-Gas Detector uses a nondispersive infrared (IR) sensor to monitor carbon dioxide levels (0-5% or 0-50,000 ppm) while simultaneously monitoring and continuously displaying up to four additional atmospheric hazards, including O2, LEL and a range of toxic gases.

The water-resistant GasAlertMicro 5 Multigas 4-Gas Detector will continuously and simultaneously monitor up to four gases and display their concentrations on a large, user-selectable backlighted LCD.

The X-am 7000 Multigas Detector reliably monitors oxygen, toxic and combustible gases and vapors in the ambient air. Three electrochemical sensors and two catalytic bead or infrared sensors detect the presence of up to five gases simultaneously and continuously. Over 25 different DragerSensors allows the X-am 7000 to detect and measure more than 100 gases and vapors.

The Lumidor Impact Multigas Monitor monitors and displays measurements for up to four gases simultaneously. The Impact Series uses unique plug-in sensor cartridges, including high-specification flammable, oxygen and patented Surecell™ toxic sensors, to ensure safe, accurate and reliable measurements.

The PAC III® ambient-air monitor continuously measures toxic gases or oxygen deficiency and enrichment, then compares levels against user-configurable values. Sensors are field-replaceable and available to monitor over 30 toxic gases.

The GasAlert Extreme is a single-gas detector that can be configured to detect a wide variety of atmospheric hazards by means of its replaceable plug-in sensor. Simply order the desired model equipped with the gas sensor of your choice from a long list of available sensors.

Accurate, compact and lightweight, the GasProbe CO provides fast, accurate sampling of CO concentrations from 0 to 1,000 parts per million. The GasProbe CO is ideal for technicians, fire department personnel and other professionals who need to measure CO levels in potentially hazardous environments.

The GasAlert Extreme is a single-gas detector that can be configured to detect a wide variety of atmospheric hazards by means of its replaceable plug-in sensor. Simply order the desired model equipped with the gas sensor of your choice from a long list of available sensors.

GasBadge® Pro features interchangeable “smart” sensors that allow the instrument to be quickly adapted to monitor unsafe levels of oxygen or any one of many toxic gases.

Sensors for use with BW Technologies GasAlert MicroClip monitors.

Eikon is a fixed life personal alarm providing two years of maintenance-free continuous monitoring. It is intrinsically safe and available in versions for hydrogen sulphide, carbon monoxide, chlorine, ammonia or for oxygen deficiency monitoring.

The Lumidor MiniMAX XT Single-Gas Detector is designed to be one of the easiest and most cost-effective single-gas detectors on the market. Available in models for the detection and measurement of CO, H2S or O2, the MiniMAX XT offers reliable, accurate readings and one-button operation that is so simple, it reduces training time dramatically. Temperature Compensation and Cell Output Decay Compensation ensure accuracy.

The GasAlert Extreme is a single-gas detector that can be configured to detect a wide variety of atmospheric hazards by means of its replaceable plug-in sensor. Simply order the desired model equipped with the gas sensor of your choice from a long list of available sensors.

Check for natural gas (methane) leaks with the handy LKD100 Pocket Leak Detector. The LKD100 will operate continuously up to 10 hours, detecting the presence of methane.

The GasAlert Extreme is a single-gas detector that can be configured to detect a wide variety of atmospheric hazards by means of its replaceable plug-in sensor. Simply order the desired model equipped with the gas sensor of your choice from a long list of available sensors.

The GasAlertClip Extreme will detect and measure levels of H2S, CO, O2 or SO2 continuously for two full years from the day of activation. Completely maintenance-free operation means batteries or sensors never need replacing and calibration is not required.

CMS is one of the most accurate and reliable spot measurement systems for determining gas and vapor concentrations. The system consists of an analyzer and substance-specific chips.

Press the START/TEST button and the GasAlertClip Extreme 3 begins providing “continuously ON” protection against H2S or CO, operating maintenance-free for three full years from the day of activation. Zero maintenance means no sensors or batteries to replace, no calibration, no downtime.

GasBadge® Plus is a two-year, maintenance-free, single gas monitor that is a low-cost option for monitoring H2S, O2, NO2 SO2 gases.

Disposable, maintenance-free gas monitor offers high performance at detecting and monitoring O2, CO or H2S, yet is extremely cost-effective. Use it for over two years, then just throw it away.

The GasBadge Datalink connects to a PC via a USB interface and utilizes Datalink Accessory Software that lets users download and view the event logs stored in both the GasBadge Plus and GasBadge Pro instruments.

Safelink joins a pair of Impact Pro Detectors together, which allows for remote monitoring of a coworker in a confined space.

The MicroDock II Docking Station is an advanced, compact and affordable automatic calibration, testing and data management system for portable gas detection equipment. It performs “hands-free” calibration and functional bump test, and verifies performance of audible and visual alarms, all completely automatically. In units equipped with a charging module, the instrument’s battery is recharged.

The M-Cal Calibration Station is capable of calibrating, function (bump) testing, and charging the M40 instrument as well as the M40/SP40 instrument/pump combination.

Simplify the calibration and management of MiniWarn, Multiwarn II and Pac III gas detectors with a system so efficient it will quickly pay for itself. Simply place the instruments in their respective calibration modules and click the “Go” button.